Omron Q2V Series Technical Manual page 602

12.7 H: TERMINALS
Figure 12.87 Example of Frequency Detection 4 (value of L4-03 Is Positive)
■
17: @Fast Stop
Setting Value Function
17 @Fast Stop
■
18: @KEBridethru
Setting Value Function
18 @KEBridethru
Note:
Refer to "KEB Ride-Thru Function on page
■
19: @ShortCBraking
Setting Value Function
19 @ShortCBraking
Note:
• When A1-02 = 8 [Control Method = EZ Vector], this function is available when you use a PM motor.
• Refer to "b2: DC INJ / SHORT CKT BRAKE on page
■
1A: @BaseblockNO
Setting Value Function
1A @BaseblockNO
ON : During baseblock
OFF : The drive is not in baseblock.
■
1B: @BaseblockNC
Setting Value Function
1B @BaseblockNC
ON : The drive is not in baseblock.
OFF : During baseblock
■
1C: FreqRefSource
Setting Value Function
1C FreqRefSource
ON : The keypad is the frequency reference source.
OFF : Parameter b1-01 or b1-15 [Freq. Ref. Sel. 1 or Freq. Ref. Sel. 2] is the frequency reference
source.
602
V/f OLV OLV/PM OLV/PM AOLV/PM EZOLV
The terminal activates when the fast stop is in operation.
V/f OLV OLV/PM OLV/PM AOLV/PM EZOLV
The activates during KEB Ride-Thru.
637" for more information.
V/f OLV OLV/PM OLV/PM AOLV/PM EZOLV
The terminal activates during Short Circuit Braking.
454" for more information.
V/f OLV OLV/PM OLV/PM AOLV/PM EZOLV
The terminal turns on during baseblock. When the drive is in baseblock, the drive output transistor stops switching and does not
make DC bus voltage.
V/f OLV OLV/PM AOLV/PM EZOLV OLV/PM
The terminal deactivates during baseblock. When the drive is in baseblock, the drive output transistor stops switching and does
not make DC bus voltage.
V/f OLV OLV/PM AOLV/PM EZOLV OLV/PM
Shows the selected frequency reference source.
Description
Description
Description
Description
Description
Description
SIEPCYEUOQ2V01A Q2V Technical Manual