Debug Ip Bgp Notifications - Dell C9000 Series Reference Manual

Version
9.9(0.0)
9.8(0.0)
9.7(0.0)
9.0.2.0
8.3.19.0
8.3.11.1
8.3.7.0
7.8.1.0
7.7.1.0
Usage Information To remove all configured debug commands for BGP, enter the no debug ip bgp
command.

debug ip bgp notifications

View information about BGP notifications received from neighbors.
C9000 Series
Syntax
debug ip bgp [vrf vrf-name] [A.B.C.D | X:X:X:X::X | peer-group
peer-group-name] notifications [in | out]
To disable debugging, use the no debug ip bgp [vrf vrf-name] [A.B.C.D |
X:X:X:X::X | peer-group peer-group-name] notifications [in | out]
command.
Parameters
vrf vrf-name
A.B.C.D
X:X:X:X::X
peer-group peer-
group-name
in
out
Description
Introduced on the C9010.
Introduced on the S3048–ON and S4048–ON.
Added the ipv4 multicast and ipv6 unicast parameters.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
(OPTIONAL) Enter the keyword vrf followed by the name of the
VRF to view neighbor BGP notification information
corresponding to that VRF.
(OPTIONAL) Enter the IPv4 address of the neighbor.
(OPTIONAL) Enter an IPv6 address.
(OPTIONAL) Enter the keyword peer-group then the name of
the peer group.
(OPTIONAL) Enter the keyword in to view BGP notifications
received from neighbors.
(OPTIONAL) Enter the keyword out to view BGP notifications
sent to neighbors
Border Gateway Protocol 453