Set Inband Vlan Command; Set Vlan Command - Avaya P333R-LB User Manual

Example:
P330-N# set cascading down fault-monitoring enable 1
Module 1 cascading-down fault monitoring enabled.

Set inband vlan Command

Use the set inband vlan command to set a value for the management vlan
(from 1 to 3071).
The syntax for this command is:
set inband vlan <value>
value
Example:
P330-N# set inband vlan 1
Management VLAN number set to 1

Set vlan Command

Use the set vlan command to create vlans.
The syntax for this command is:
set vlan <vlan-id> [name <vlan-name>]
vlan-id
vlan-name
Example:
P330-N# set vlan 3 name v3
VLAN ID 3 is named v3.
Note: If you wish to define a name which includes spaces, you must enclose the
entire name in quotation marks, e.g. "new york".
Avaya P333R-LB User's Guide
A VLAN number between 1 and 3071.
vlan number
vlan name
Chapter 5 Cajun Campus CLI – Layer 2
113