Ip Admin-State Command; Ip Netbios-Rebroadcast Command; Ip Directed-Broadcast Command - Avaya P333R-LB User Manual

ip admin-state Command

Use the ip admin-state command to set the administrative state of an IP
interface. The default state is up.
The syntax for this command is:
ip admin-state <up/down>
up/down

ip netbios-rebroadcast Command

Use the ip netbios-rebroadcast command to set NETBIOS rebroadcasts
mode on an interface. The no form of this command disables NETBIOS
rebroadcasts on an interface.
The syntax for this command is:
[no] ip netbios-rebroadcast <mode>
The possible values of mode are:
both
none
Example:
To enable rebroadcasting of netbios packets received by and sent from the interface
"marketing":
Router-N(config-if:marketing)# ip netbios-rebroadcast both

ip directed-broadcast Command

Use the ip directed-broadcast command to enable net-directed broadcast
forwarding. The no form of this command disables net-directed broadcasts on an
interface.
The syntax for this command is:
[no] ip directed-broadcast
Avaya P333R-LB User's Guide
Chapter 6
Administrative state of the interface. The choices are
up (active) or down (inactive).
Netbios packets received on the interface
rebrodcasted to other interfaces and netbios packets
received on other interfaces are rebroadcasted into
this interface.
Netbios packets are not rebroadcasted into or out of
this interface.
Cajun Campus CLI - Layer 3
167