Note: If you wish to define a name which includes spaces, you must enclose the
entire name in quotation marks, e.g. "new york".
show ip protocols Command
Use the ip protocols command to display the IP routing protocol process parameters
and statistics.
The syntax for this command is:
show ip protocols [<protocol>]
protocol
Example:
show ip protocols
show ip protocols RIP -
Output Example:
Routing Protocol is "rip"
Sending updates every 30 seconds, next due in 0 seconds
Invalid after 180 seconds, flushd after 300
Redistributing: rip
Default version control: rip version 1
Interface
Routing for Networks:
Routing Information Sources:
Gateway
show ip icmp Command
Use the show ip icmp command to display the status of ICMP error messages.
The syntax for this command is:
show ip icmp
P334T-ML User's Guide
R IP | OSPF.
-
Display all running protocols details
Display RIP details
Version
Last Update
Chapter 7
CLI – Layer 3
Key
163