Copy Tftp Module-Config - Avaya P333R User Manual

copy tftp module-config

Use the copy tftp module-config command to download the switch-level
configuration from a saved file into the current NVRAM running configuration of a
switch, via TFTP. To use this command, you need to have an active tftp server, and
to create a file into which to download the data. If CajunView is running, an
additional tftp server is not required.
Note: You should perform the nvram initialize command prior to the
copy tftp operation.
The syntax for this command is:
copy tftp module-config <filename> <ip>
filename
ip
Example:
P330-N# copy tftp module-config
192.168.49.10 5
copy tftp EW_archive
Use the copy tftp EW_archive command to download the P330 Device
Manager application into the switch via TFTP. To use this command, you need to
have an active TFTP server, and to create a file into which to download the data. If
CajunView is running, an additional TFTP server is not required.
The syntax for this command is:
copy tftp EW_archive <filename> <ip> <mod_num>
filename
ip
mod_num
Example:
P330-N# copy tftp EW_archive c:\p330\p330web201
192.168.49.10 5
Avaya P333T-PWR User's Guide
The file name (full path)
The ip address of the TFTP server
c:\config\switch1.cfg
Embedded Web Manager image file name (full path)
The ip address of the TFTP server
Target switch number
Chapter 5 CLI – Layer 2
129