Table of Contents
Advertisement
Chapter 6
Avaya P130 CLI
Show ppp baud-rate Command
Use the show ppp baud-rate command to view the baud rate.
The syntax for this command is:
show ppp baud-rate
Example:
P130-N> show ppp baud-rate
PPP baud rate is 38400
Set ppp baud-rate Command
Use the set ppp baud-rate command to define the PPP baud rate to use. The
peer baud-rate must be set to the same value.
The syntax for this command is:
set ppp baud-rate <9600 | 19200 | 38400>
Example:
P130-1# set ppp baud-rate 19200
104
Avaya P130 User's Guide
Advertisement
Table of Contents
