Show ppp authentication Command
Use the show ppp authentication command to display the authentication
method used for PPP sessions. The shared chap-secret will be displayed only when
accessed from the Technician level.
The syntax for this command is:
show ppp authentication
Example:
P130-N> show ppp authentication
PPP Authentication Parameters:
-----------------------------------------
Incoming: CHAP
P130-N> show ppp authentication
PPP Authentication Parameters:
-----------------------------------------
Incoming: CHAP
CHAP secret:
Set ppp authentication incoming Command
Use the set ppp authentication incoming command to define which
authentication method will be used separately when doing a PPP server or client
session.
The syntax for this command is:
set ppp authentication incoming {pap | chap | none}
incoming
pap
chap
none
Avaya P130 User's Guide
sodot
Keyword for setting the authentication method used
in PPP dial-in sessions.
Keyword to use the PAP authentication method.
Keyword to use the CHAP authentication method.
Keyword for performing no authentication.
Chapter 6
Avaya P130 CLI
101