show radius authentication
Command Mode
Description
Syntax
Sample Output
Systems
Document No. 10-300090, Issue 1
User.
Displays the current RADIUS configuration. All parameters are displayed
with the exception of the shared secrets.
show radius authentication
The following command displays the current RADIUS settings:
(configure)# show radius authentication
RADIUS Authentication Configuration
===================================
Enable State: Disabled
Primary Server: 10.10.10.6
Secondary Server: 10.10.10.1
Source Ip: 10.10.5.6
Realm:
Group:
Retry Number: 1
Retry Time: 7 seconds
UDP Port: 1812
Cajun-Service-Type required: Enabled
P550R, P580, P880, and P882.
RADIUS
24-11