01/FORK, TRIPLE CLAMP
Removing the fork protector
5.10
Installing the fork protector
5.11
Performing a fork service
5.12
Info
These operations are the same on both fork legs.
–
Position the brake line, wiring harness, and clamp. Mount and tighten screws
Subsequent work
–
Install the front wheel. (
Preliminary work
–
Remove the headlight mask with the headlight. (
–
Raise the motorcycle with the lift stand. (
–
Remove the front wheel. (
–
Remove the fork legs. (
Main work
–
Remove screws
–
Remove the screws on the right fork leg. Remove the fork protector upwards.
101327-10
Main work
–
Position the fork protection on the left fork leg. Mount and tighten screws
Guideline
Remaining screws, chassis
–
Position the fork protection on the right fork leg. Mount and tighten the screws.
Guideline
Remaining screws, chassis
101327-10
Subsequent work
–
Install the fork legs. (
–
Install the front wheel. (
Condition
The fork legs have been removed.
p. 80)
p. 10)
p. 80)
p. 14)
on the left fork leg. Remove the fork protector upwards.
1
M6
M6
p. 15)
p. 80)
.
6
p. 78)
.
1
10 Nm (7.4 lbf ft)
10 Nm (7.4 lbf ft)
16