Plug/Jack Locations
How to use the Plug/Jack Location List
The Plug/Jack Location List below is provided to locate plugs, jacks, or other terminating
devices. Locate the desired termination device in the first column (Connector Number) of the
list. Refer to the second column (Figure Number) to determine the figure number of the electri-
cal termination device. Refer to the (Item Number) column to determine the item number in the
adjacent Figure Number column. The fourth column supplies the title of the Figure or the asso-
ciated component(s).
NOTE: Connectors numbered "CN" and "FS" are listed after the "P and J" connectors.
The following plug/jack locations are divided into 4 separate tables:
Table
1, IOT Plug/Jack
location List;
Table
2, Integrated Office Finisher Plug/Jack Location list:
Table
3, Office Finisher
LX Plug/Jack Location List; and
Table
4, HCF Plug/Jack Location list.
Initial Issue
Wiring Data
07/2011
Plug/Jack Locations
WorkCentre 5335 Family Service Documentation
7-3
BUS Updated 12/2011