Layout Adjustment - Xerox ColorQube 9301 User Manual

Layout Adjustment

Using the Layout Adjustment features, you can change the appearance of the output image. This
includes shifting the image, producing a mirror image, deleting an area from any or all of the edges of
the original, and copying from book originals.
Original Orientation
Use to specify the orientation of the originals being scanned. The options are:
• Portrait Originals refer to the image orientation on the original documents. Use this option to
select a Portrait image orientation. Originals can be fed in any direction.
• Landscape Originals refers to the image orientation on the original documents. Use this option to
select a Landscape image orientation. Originals can be fed in any direction.
• Upright Images refers to the direction the images are loaded in the automatic document feeder.
Use this option if the images are in the orientation, matching the image shown when loaded in
the automatic document feeder.
• Sideways Images refers to the direction the images are loaded in the automatic document
feeder. Use this option if the images are in the orientation, matching the image shown when
loaded in the automatic document feeder.
Select OK to save the selections and exit.
Original Size
Original Size allows you to specify automatic size detection of the originals, mixed size originals, or the
specific size of the image scanned. The options are:
• Auto Detect is the default setting and enables automatic size sensing. The size detected is
matched to standard-size paper.
• Preset Scan Areas allows you to define the size of the original from a list of pre-set, standard
original sizes. You can view the list by using the scroll bar.
• Custom Scan Area is used to mark a specific area for scanning. Measure the desired scan area on
the original and type the X- and Y-axes measurements in the fields provided. Only the area
specified is scanned.
• Mixed Size Originals allows you to scan documents containing different size pages. The pages
must be the same width, like A4 LEF and A3 SEF (8.5 x 11 in. LEF and 11 x 17 in. SEF). Other
combinations are shown on the screen. The printer detects the size of the documents and can
produce the following output:
• If Auto Reduce/Enlarge and a specific Paper Supply is selected, all the images are reduced
or enlarged and copied onto the same size paper.
• If Auto Paper Supply is selected, the images are copied size for size, and a mix of paper sizes
is the output.
ColorQube 9301/9302/9303 Multifunction Printer

Layout Adjustment

17
User Guide