Sample-Rate - Dell PowerConnect J-EX4200-24T Software Manual

Dell PowerConnect J-Series Ethernet Switch Complete Software Guide for Junos OS

sample-rate

Syntax
Hierarchy Level
Release Information
Description
Default
Options
Required Privilege
Level
Related
Documentation
3302
sample-rate number;
[edit protocols sflow],
[edit protocols sflow interfaces interface-name]
Statement introduced before Junos OS Release 10.2 for J-EX Series switches.
Set the ratio of the number of packets to be sampled in sFlow network traffic monitoring.
For example, if you specify a rate of 1000, every thousandth packet (1 packet out of 1000)
is sampled.
If no sample rate is configured for a particular interface, the switch samples at the rate
configured for the global sFlow configuration. If no global rate is configured, the switch
samples 1 in 2000 packets.
—Denominator of the ratio that composes the sample rate.
number
Range: 100–1,048,576
Default: 2000
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
[edit protocols] Configuration Statement Hierarchy on page 48
Configuring sFlow Technology for Network Monitoring (CLI Procedure) on page 3290
Example: Monitoring Network Traffic Using sFlow Technology on J-EX Series Switches
on page 3285