Sensor; Iap Sensor Inspection; Iap Sensor Removal/Installation; Tp Sensor Inspection - Suzuki DL1000 Service Manual

4-74 FI SYSTEM

SENSOR

IAP SENSOR INSPECTION

The intake air pressure sensor is located at the rear side of the
air cleaner box. (#4-34)

IAP SENSOR REMOVAL/INSTALLATION

• Lift and support the fuel tank. (#4-51)
• Remove the IAP sensor 1 by removing the screw and dis-
connect the coupler 2 and vacuum hose 3.
• Installation is in the reverse order of removal.

TP SENSOR INSPECTION

• The throttle position sensor is installed on the No.1 throttle
body. (#4-36)

TP SENSOR REMOVAL/INSTALLATION

• Remove the fuel tank and air cleaner box. (#4-52 and -60)
• Remove the TP sensor setting screws 1 and disconnect the
coupler.
• Install the TP sensor to the No.1 throttle body. Refer to page
4-68 for TP sensor setting procedure.

STP SENSOR INSPECTION

The secondary throttle position sensor is installed on the No.1
throttle body. (#4-44)

STP SENSOR REMOVAL/INSTALLATION

• Remove the fuel tank and air cleaner box. (#4-52 and -60)
• Remove the STP sensor setting screws 1 and disconnect the
coupler.
• Install the STP sensor to the No.1 throttle body. Refer to
pages 4-67 and -68 for STP sensor setting procedure.