Trunk Groups And Routing Parameters - AudioCodes Mediant 800B User Manual

Media gateway & enterprise session border controller (e-sbc)
Hide thumbs Also See for Mediant 800B:
Table of Contents

Advertisement

Parameter
[PulseDialGenerationBreakTime]
[PulseDialGenerationMakeTime]
[PulseDialGenerationInterDigitTime]
61.10.12

Trunk Groups and Routing Parameters

The routing parameters are described in the table below.
Parameter
Trunk Group Table
Trunk Group Table
configure voip > gw hunt-
or-trunk-group TrunkGroup
[TrunkGroup]
Trunk Group Settings Table
Trunk Group Settings
configure voip > gw hunt-
or-trunk-group trunk-group-
setting
[TrunkGroupSettings]
User's Manual
Defines the duration of the Break connection (off-hook) for
FXO pulse dial generation.
The valid value range is 20 to 120 (in msec). The default is 60.
Note: For the parameter to take effect, a device reset is
required.
Defines the duration of the Make connection (on-hook) for
FXO pulse dial generation.
The valid value range is 20 to 120 (in msec). The default is 40.
Note: For the parameter to take effect, a device reset is
required.
Defines the inter-digit duration (time between consecutively
dialed digits) for FXO pulse dial generation.
The valid value range is 300 to 1500 (in msec). The default is
700.
Note: For the parameter to take effect, a device reset is
required.
Table 61-68: Routing Parameters
Defines and activates Trunk Groups.
The format of the ini file table parameter is as follows:
[TrunkGroup]
FORMAT TrunkGroup_Index = TrunkGroup_TrunkGroupNum,
TrunkGroup_FirstTrunkId, TrunkGroup_FirstBChannel,
TrunkGroup_LastBChannel, TrunkGroup_FirstPhoneNumber,
TrunkGroup_ProfileName, TrunkGroup_LastTrunkId,
TrunkGroup_Module;
[\TrunkGroup]
For a description of the table, seeConfiguring Trunk Groups on
page 459.
Note: Trunk Group ID 1 is denoted as 0 in the table.
Defines the rules for channel allocation per Trunk Group.
The format of the ini file table parameter is as follows:
[TrunkGroupSettings]
FORMAT TrunkGroupSettings_Index =
TrunkGroupSettings_TrunkGroupId,
TrunkGroupSettings_ChannelSelectMode,
TrunkGroupSettings_RegistrationMode,
TrunkGroupSettings_GatewayName,
TrunkGroupSettings_ContactUser,
TrunkGroupSettings_ServingIPGroupName,
1118
Mediant 800B Gateway and E- SBC
Description
Description
Document #: LTRT-10296

Advertisement

Table of Contents
loading

Table of Contents