Selecting Input Mode; Video Input Mode; Rgb Input Mode - Fujitsu P-SU4H30E User Manual

SELECTING INPUT MODE

VIDEO INPUT MODE

* You can also use the buttons
on the display's control
panel to perform these steps.

RGB INPUT MODE

E-26
1
Press the –
select the input mode.
You can select from VIDEO 1 mode to VIDEO 6
mode.
The video modes corresponding to each input
terminal are as follows.
• VIDEO1: SCART
• VIDEO2: SCART
• VIDEO3: Video, S-video
• VIDEO4: SCART
• VIDEO5: Component video
• VIDEO6: Component video
* For selection of the input terminal, see
"SETTING THE INPUT TERMINALS" on
P. E-41.
1
Press –
input mode.
You can select between the modes from RGB1 to
RGB3.
The input terminal of each RGB mode is as
follows.
• RGB1: DVI-D
• RGB2: mD-sub
• RGB3: mD-sub
* For selection of the input terminal, see
"SETTING THE INPUT TERMINALS" on
P. E-41.
buttons to
Video1 mode
to select the
RGB1 mode