Table of Contents
Advertisement
XG700 User's Guide
5.15.10 show statistics traffic-bytes
Function
Displays the cumulative number of bytes which have been sent or received to/from each port after the system startup.
Prompt
xg> or xg#
Command syntax
show statistics traffic-bytes
Command type
Operation management command
Output format
xg# show statistics traffic-bytes
Traffic Statistics(Total Frame Bytes) 2005/08/22-19:22:55
==========================================================
[No.1]
Port
Link State/ STP State : Up/Forward
Tx-Frame Bytes
Rx-Frame Bytes
[No.2]
[No. ]
Displays statistics of each port.
Port
Displays port numbers.
Link State/STP State
Displays the port state in the Link State or STP State format.
The Link State may indicate one of the following link states.
−
−
The STP State displays the current port status based on the STP (Spanning Tree Protocol). Note that the STP State is
not displayed if the Link State is Down.
For port status details, see
Tx-Frame Bytes
Displays the cumulative number of bytes which have been sent after the system startup.
Rx-Frame Bytes
Displays the cumulative number of bytes which have been received after the system startup.
: 1
: 71872
: 63424
Down
The port link is down.
Up
The port link is up.
"Spanning Tree Protocol Port
All Rights Reserved, Copyright (C) PFU LIMITED 2005-2006
States".
183/266
Advertisement
Table of Contents
