Ribcl Messages - HP ProLiant Gen9 Troubleshooting Manual

Event log display
Power on request received by: Type
Virtual NMI selected by: User
Virtual Serial Port session started by: User
Virtual Serial Port session stopped by: User
Virtual Serial Port session login failure from: User
Embedded media manager failed initialization
Blob store file system is inconsistent. It will be
reinitialized on the next iLO reset and unavailable
until then.
Media controller exception
Unable to fetch valid embedded media manager
firmware image
Self test error attempting to test the media controller Displays when iLO is unable to communicate with the
Could not start embedded media controller
Could not attach to embedded media controller
Restarted
Failed restart
Firmware upgrade via online flash component
failed.

RIBCL messages

The following table lists the error messages displayed when using the RIBCL XML scripting language.
Status number
0x0000
0x0001
0x0002
0x0003
0x0004
0x0005
0x0006
0x0007
Error message
No error.
Syntax error.
This user is not logged in.
Login name is too long.
Password is too short.
Password is too long.
User table is full. No room for new user.
Cannot add user. The login/ user name already exists.
Event log explanation
A power request was received as one of the following
types:
Power Button
Wake On LAN
Automatic Power On
Displays when an authorized user selects the Virtual NMI
button.
Displays when a Virtual Serial Port session is started.
Displays when a Virtual Serial Port session is ended.
Displays when a login failure occurs.
Displays if iLO cannot start the embedded subsystem. Reset
iLO and try again. The embedded media subsystem
includes the internal SD-Card slot and the AHS store.
Displays when an internal management data store is
corrupt. Some management functions may be unavailable
until iLO is reset to reinitialize.
Displays when one of several possible exceptions is
generated by the Internal SD-Card and AHS Media
controller. The exception should self correct.
Displays when iLO cannot find the Media controller in the
system firmware. There is a ROM issue or a system failure
causing the error.
Media controller. This is a system failure that can result in
loss of SD-Card slot and AHS functionality.
Displays when the Media controller initialization failed.
Displays when the Media controller initialization failed.
Displays when iLO is reset and successfully restarted the
Media controller.
Displays when iLO tried and failed to reset the Media
controller. A retry of the reset may succeed.
Displays when the iLO Firmware could not be upgraded
from the Online ROM Flash components.
HP iLO errors 238