Index - HP ProLiant Gen9 Troubleshooting Manual

Index

1
100 series, error messages 49
1003 - VCM-OA communication down 217
1022 - Domain state FAILED 218
1023 - Domain state PROFILE_FAILED 218
1026 - Domain state NO_COMM 218
1100 series, error messages 66
1500 series, error messages 66
1600 series, error messages 67
1700 series, error messages 71
17012 - Enet UplinkSet state FAILED 231
17014 - Enet uplinkset state is DISABLED 231
1800 series, error messages 90
2
200 series, error messages 51
2003 - Enclosure import failed 219
2011 - Enclosure state NO_COMM 219
2013 - Enclosure state failed 220
2016 - Enclosure Fined failed 220
3
300 series, error messages 63
3009 - Enet Module OA CPU Fault Event 221
3012 - Enet Module State FAILED 221
3014 - Enet Module state INCOMPATIBLE 221
3019 - Enet Module state MISSING 222
3023 - Enet Module state NO_COMM 223
3031 - Enet Module IP is 0.0.0.0 223
3101 - Port is disabled as network loop is
detected 223
3102 - Port was disabled because a pause flood was
detected 224
4
400 series, error messages 65
4009 - FC Module OA CPU Fault Event 224
4012 - FC Module State Failed 224
4014 - FC Module State Incompatible 224
4019 - FC Module State is NO_COMM 225
5
5009 - Server OA fault event 225
5012 - Server state FAILED 226
5014 - Server state INCOMPATIBLE 226
5019 - Server state is NO_COMM 226
5022 - Missing information for one or more blades of a
multi-blade server 226
5050 - The BIOS for the following devices is not
compatible with Virtual Connect 226
5055 - The server BIOS needs to be updated to at least
the version dated 227
5056 - Unable to release power hold on the server.
Unassign and re-assign profile. 227
6
600 series, error messages 65
6012 - Profile state FAILED 227
6020 - Profile has the same network on two Flex-10
NICs on the same physical port 227
6021 - Profile has PXE enabled on a non-primary
Flex-10 NIC 228
6022 - Profile has iSCSI boot enabled on an
unsupported Flex-10 NIC 228
6023 - Profile is assigned to a multi-blade server that
has data missing 228
6030 - Profile could not be assigned to powered up
server 228
7
7012 - Enet Network state FAILED 229
7014 - Enet Network state DISABLED 229
8
8012 - FC Fabric state FAILED 229
9
9012 - Unknown Module state FAILED 230
9014 - Unknown Module state INCOMPATIBLE 230
9019 - Unknown Module state NO_COMM 230
Index 405