Cgi Log Messages; Cli Log Messages; Interconnect Bay Log Messages - HP ProLiant Gen9 Troubleshooting Manual

Log type: LOG_WARNING, Failure type: Info
OA: An error occurred updating the password file
OA: can't change pwd for `[value]'
OA: Failed login attempt with user [username]
OA: incorrect password for `[username]'
OA: Onboard Administrator is rebooting
OA: password locked for `[value]'
OA: [value:username] logged out of the Onboard Administrator
Log type: LOG_CRIT, Failure type: Info
OA: daemon is exiting because of SIGTERM system will reset.
Log type: LOG_ERR, Failure type: Info
OA: can't setuid(0)
OA: unable to determine TTY name got [value]
Log type: LOG_INFO, Failure type: Info
OA: Password for `[username]' changed by system
OA: Password for `[value]' changed by user `[username]'
OA: root login [value]
sulogin: Normal startup
sulogin: System Maintenance Mode

CGI log messages

Log type: LOG_ERR, Failure type: SW
cdrom.iso: There was a problem reading from /dev/cdrom, however we cannot back
out now.

CLI log messages

Log type: LOG_WARNING, Failure type: Info
OA: [value] logged out of the Onboard Administrator
Log type: LOG_INFO, Failure type: Info
OA: ProLiant iLO firmware update attempted by user [value]

Interconnect bay log messages

Log type: LOG_WARNING, Failure type: Info
OA: [value] was connected to interconnect bay #[value]
OA: [value] was disconnected from interconnect bay #[value]
HP Onboard Administrator errors 176