HP ProLiant Gen9 Troubleshooting Manual page 163

142 The maximum number of LDAP certificates already exist.
143 Could not remove LDAP certificate.
144 You must configure the directory server and at least one search context before enabling LDAP.
145 Could not set the LDAP group description.
146 An error occurred while communicating with the other Onboard Administrator.
147 Unable to perform the operation. Retry the operation or restart OA. (System Error 147)
148 The other Onboard Administrator is not present.
149 No redundant Onboard Administrator found. Cannot failover.
150 The user could not be authenticated.
151 Invalid parameter for setting blade one time boot.
152 Invalid parameter for setting the blade boot priority.
153 A blade boot device can only be listed once.
154 NTP Poll time must be between 60 and 86400 seconds.
155 Could not create new file.
156 Could not write the file to the disk.
157 The submitted image is too big.
158 The submitted image is not a BMP image.
159 The submitted image does not have the appropriate dimensions.
160 Non-standard BMP images are not supported.
161 The specified item was not found.
162 The protocol specified in the URL is not supported.
163 The upload to the specified URL failed.
164 The Onboard Administrator did not fail over.
165 The blade is in a powered off state.
167 The IP manager does not exist.
168 There is no SSH key installed.
169 There was a problem running the configuration script.
170 Missing credentials.
171 Caught the SIGSEGV signal.
173 No trap receivers were specified.
174 There are no SSH keys installed.
175 There was an error attempting to clear the SSH keys.
176 The IP address is already listed.
177 There was an error getting the SSO trust mode.
178 The submitted SSO trust mode is invalid.
HP Onboard Administrator errors 163