Vlan Log Messages; Onboard Administrator Snmp Traps - HP ProLiant Gen9 Troubleshooting Manual

OA: Could not restore FIPS mode (error code: [value]).
OA: Could not restore the password for user [value].
OA: Could not restore the strict passwords setting.
OA: Could not restore the minimum password length.
OA: Could not restore the password for user [value].

VLAN log messages

Log type: LOG_NOTICE, Failure type: Info
OA: May need to reboot the interconnects to pick up new IP address or wait until
DHCP lease expires
OA: VLAN ID for interconnect bay [value] changed to [value]. May need to reboot
the interconnect to pick up new IP address or wait until DHCP lease expires
OA: VLAN ID for OA changed from [value] to [value]
OA: VLAN ID for server bay [value] changed to [value]
OA: VLAN is disabled
OA: VLAN is enabled. OA VLAN ID = [value]
Log type: LOG_INFO, Failure type: Info
OA: VLAN revert is canceled

Onboard Administrator SNMP traps

The BladeSystem Onboard Administrator supports the following SNMP traps.
Trap ID
22001
22002
22003
22004
22008
22009
22010
22011
22012
22013
22014
22015
22016
22017
22018
22019
22020
Trap name
cpqRackNameChanged
cpqRackEnclosureNameChanged
cpqRackEnclosureRemoved
cpqRackEnclosureInserted
cpqRackEnclosureFanFailed
cpqRackEnclosureFanDegraded
cpqRackEnclosureFanOk
cpqRackEnclosureFanRemoved
cpqRackEnclosureFanInserted
cpqRackPowerSupplyFailed
cpqRackPowerSupplyDegraded
cpqRackPowerSupplyOk
cpqRackPowerSupplyRemoved
cpqRackPowerSupplyInserted
cpqRackPowerSubsystemNotRedundant
cpqRackPowerSubsystemLineVoltageProble
m
cpqRackPowerSubsystemOverloadCondition Enclosure power subsystem overload
Description
Rack Name has changed
Enclosure Name has changed
Linked Enclosure removal detected
Linked Enclosure insertion detected
Enclosure fan has failed
Enclosure fan is degraded
Enclosure fan is OK
Enclosure fan is removed
Enclosure fan is inserted
Enclosure power supply has failed
Enclosure power supply is degraded
Enclosure power supply is OK
Enclosure power supply is removed
Enclosure power supply is inserted
Enclosure power subsystem is not
redundant
Enclosure power subsystem line voltage
problem
condition
HP Onboard Administrator errors 204