HP ProLiant Gen9 Troubleshooting Manual page 394

Log Message: The %1 Agent is older than other components. The %1 Agent is older than the other
components of the Insight Agents. Reinstall the entire Insight Agents package to correct this error.
Event identifier: cpqnimsg.dll - 1029 (Hex)0x84350405 (Service Event)
Log Severity: Warning (2)
Log Message: The NIC SNMP Management Agent has failed to refresh data associated with key %1. Check
to make sure management service is up and running. This may cause data received from Compaq SNMP
agent to be old or invalid.
Event identifier: cpqnimsg.dll - 1030 (Hex)0xc4350406 (Service Event)
Log Severity: Error (3)
Log Message: The NIC SNMP Management Agent was unable to process a SNMP request because the
Insight Agents Service is not up and running.
Event identifier: cpqnimsg.dll - 1031 (Hex)0x44350407 (Service Event)
Log Severity: Information (1)
Log Message: The NIC SNMP Management Agent has continued refreshing data for the key associated with
%1.
Event identifier: cpqnimsg.dll - 1032 (Hex)0x84350408 (Service Event)
Log Severity: Warning (2)
Log Message: Unable to read security configuration information. SNMP sets have been disabled.
Cause: This can be caused by an invalid or missing configuration or by a corrupt registry. Reinstalling the
Insight Agents may correct this problem.
Event identifier: cpqnimsg.dll - 1033 (Hex)0x44350409 (Service Event)
Log Severity: Information (1)
Log Message: The SNMP Insight Agent will allow SNMP sets.
Event identifier: cpqnimsg.dll - 1034 (Hex)0x4435040a (Service Event)
Log Severity: Information (1)
Log Message: The SNMP Insight Agent will not allow SNMP sets.
Event identifier: cpqnimsg.dll - 1035 (Hex)0xc435040b (Service Event)
Log Severity: Error (3)
Log Message: Unable to load a required library. This error can be caused by a corrupt or missing file.
Reinstalling the Insight Agents or running the Emergency Repair procedure may correct this error.
Event identifier: cpqnimsg.dll - 1036 (Hex)0x8435040c (Service Event)
Log Severity: Warning (2)
Log Message: The NIC SNMP Management Agent was unable to forward an SNMP trap to the Compaq
Remote Insight Board trap due to processing error. The data contains the error code.
Event identifier: cpqnimsg.dll - 1037 (Hex)0x8435040d (Service Event)
Log Severity: Warning (2)
Log Message: The NIC SNMP Management Agent was unable to get last modification time for key %1.
Microsoft Windows Event ID and SNMP traps 394