Conrep Screen Output - HP ProLiant Gen9 Troubleshooting Manual

Value
0
1
2
3
4
5

CONREP screen output

A typical screen output generated by CONREP is similar to the following:
conrep 3.00 - SmartStart Scripting Toolkit Configuration Replication Program
Copyright (c) 2007-2009 Hewlett-Packard Development Company, L.P.
System Type: ProLiant DL360 G4
ROM Date: 08/16/2005
ROM Family: P52
XML System Configuration: conrep.xml
Hardware Configuration: demo.dat
File contains global platform restrictions
Global Restriction: [minimumconrepversion] OK
Platform check:
[ProLiant DL3] match
[ProLiant DL5] no match
Saving configuration data to demo.dat.
CONREP Return code: 0
Meaning
The command was completed successfully.
The hardware definition data file (conrep.xml) is corrupt or not found.
The system configuration data file (conrep.dat) is corrupt or not found.
The Health Driver is required for this operation but is not loaded.
The system administrator password is set. The settings cannot be changed unless this
password is cleared.
The XML hardware definition file (conrep.xml) is corrupt or not appropriate for the current
platform.
CONREP errors 234