HP ProLiant Gen9 Troubleshooting Manual page 275

Log Severity: Warning (2)
Log Message: Unable to load a required library. This error can be caused by a corrupt or missing file.
Reinstalling the Management Agents or running the Emergency Repair procedure may correct this error.
Event identifier: cpqhsmsg.dll - 3090 (Hex)0x84350c12 (Service Event)
Log Severity: Warning (2)
Log Message: Unable to allocate memory. This indicates a low memory condition. Rebooting the system will
correct this error.
Event identifier: cpqhsmsg.dll - 3840 (Hex)0x84350f00 (Service Event)
Log Severity: Warning (2)
Log Message: Unable to allocate memory. This indicates a low memory condition. Rebooting the system will
correct this error.
Event identifier: cpqhsmsg.dll - 3841 (Hex)0x84350f01 (Service Event)
Log Severity: Warning (2)
Log Message: Could not read from the registry sub-key. This error can be caused by a corrupt registry or a
low memory condition. Rebooting the server may correct this error.
Event identifier: cpqhsmsg.dll - 3842 (Hex)0x84350f02 (Service Event)
Log Severity: Warning (2)
Log Message: Could not write the registry sub-key: "%1". This error can be caused by a corrupt registry or
a low memory condition. Rebooting the server may correct this error.
Event identifier: cpqhsmsg.dll - 3843 (Hex)0x84350f03 (Service Event)
Log Severity: Warning (2)
Log Message: Could not read the registry sub-key: "%1". This error can be caused by a corrupt registry or
a low memory condition. Rebooting the server may correct this error.
Event identifier: cpqhsmsg.dll - 3844 (Hex)0x84350f04 (Service Event)
Log Severity: Warning (2)
Log Message: Could not write the registry sub-key: "%1". This error can be caused by a corrupt registry or
a low memory condition. Rebooting the server may correct this error.
Event identifier: cpqhsmsg.dll - 3845 (Hex)0x84350f05 (Service Event)
Log Severity: Warning (2)
Log Message: Could not write the registry sub-key: "%1". This error can be caused by a corrupt registry or
a low memory condition. Rebooting the server may correct this error.
Event identifier: cpqhsmsg.dll - 3855 (Hex)0x84350f0f (Service Event)
Log Severity: Warning (2)
Log Message: Could not open a cluster enumeration object. The Cluster service may not be running. Try to
restart the Cluster service.
Event identifier: cpqhsmsg.dll - 3856 (Hex)0x84350f10 (Service Event)
Log Severity: Warning (2)
Log Message: Could not enumerate all of the nodes in the cluster. The data contains the error code.
Microsoft Windows Event ID and SNMP traps 275