HP ProLiant Gen9 Troubleshooting Manual page 236

Event log display
Server power restored
Browser logout: IP address
Server reset
Failed Browser login ? IP Address: IP address
iLO Self Test Error: #
iLO reset
On-board clock set; was #:#:#:#:#:#
Server logged critical error(s)
Event log cleared by: User
iLO reset to factory defaults
iLO ROM upgrade to #
iLO reset for ROM upgrade
iLO reset by user diagnostics
Power restored to iLO
iLO reset by watchdog
iLO reset by host
Recoverable iLO error, code #
SNMP trap delivery failure: IP address
Test SNMP trap alert failed for: IP address
Power outage SNMP trap alert failed for: IP
address
Server reset SNMP trap alert failed for: IP address Displays when the SNMP trap does not connect to the
Illegal login SNMP trap alert failed for: IP address Displays when the SNMP trap does not connect to the
Diagnostic error SNMP trap alert failed for: IP
address
Host generated SNMP trap alert failed for: IP
address
Network resource shortage SNMP trap alert failed
for:
IP address
iLO network link up
iLO network link down
iLO Firmware upgrade started by: User
Host server reset by: User
Host server powered OFF by: User
Host server powered ON by: User
Event log explanation
Displays when the server power is restored.
Displays the IP address for the browser that logged out.
Displays when the server is reset.
Displays when a browser login fails.
Displays when iLO has failed an internal test. The probable
cause is that a critical component has failed. Further use of
iLO on this server is not recommended.
Displays when iLO is reset.
Displays when the onboard clock is set.
Displays when the server logs critical errors.
Displays when a user clears the event log.
Displays when iLO is reset to the default settings.
Displays when the ROM has been upgraded.
Displays when iLO is reset for the ROM upgrade.
Displays when iLO is reset by user diagnostics.
Displays when the power is restored to iLO.
Displays when an error has occurred in iLO and iLO has
reset itself. If this issue persists, call customer support.
Displays when the server resets iLO.
Displays when a non-critical error has occurred in iLO and
iLO has reset itself. If this issue persists, call customer
support.
Displays when the SMNP trap does not connect to the
specified IP address.
Displays when the SNMP trap does not connect to the
specified IP address.
Displays when the SNMP trap does not connect to the
specified IP address.
specified IP address.
specified IP address.
Displays when the SNMP trap does not connect to the
specified IP address.
Displays when the SNMP trap does not connect to the
specified IP address.
Displays when the SNMP trap does not connect to the
specified IP address.
Displays when the network is connected to iLO.
Displays when the network is not connected to iLO.
Displays when a user starts a firmware upgrade.
Displays when a user resets the host server.
Displays when a user powers off a host server.
Displays when a user powers on a host server.
HP iLO errors 236