HP ProLiant Gen9 Troubleshooting Manual page 321

Supporting SNMP Trap Description: "Accelerator lost battery power. Data Loss possible."
NT Event ID: 1206 (Hex)0x843504b6 (cpqstmsg.dll)
Log Severity: Warning (2)
Event Title: Drive Array Accelerator Battery Failed.
Log Message: The array accelerator board attached to the array controller in %4 is reporting a battery
failure.
SNMP Trap: cpqDa6AccelBatteryFailed - 3040 in CPQIDA.MIB
Symptom: Accelerator Board Battery Failed. This trap indicates that the agent has detected a battery failure
associated with the array accelerator cache board.
User Action: Replace the Accelerator Cache Board.
Supporting SNMP Trap Data:
•
sysName
•
cpqHoTrapFlags
•
cpqDaPhyDrvCntlrIndex
•
cpqDaCntlrHwLocation
•
cpqDaCntlrModel
•
cpqDaAccelCntlrIndex
•
cpqDaAccelSerialNumber
•
cpqDaAccelTotalMemory
Supporting SNMP Trap Description: "Battery status is failed."
NT Event ID: 1207 (Hex)0x843504b7 (cpqstmsg.dll)
Log Severity: Warning (2)
Event Title: Drive Array Tape Library Status Change.
Log Message: The tape library in %4, SCSI bus %5, SCSI target %6 has a new status of %7.
SNMP Trap: cpqDa6TapeLibraryStatusChange - 3041 in CPQIDA.MIB
Symptom: Tape Library Status Change. This trap indicates that the agent has detected a change in the status
of a tape library. The variable cpqDaTapeLibraryStatus indicates the current tape library status. The variable
cpqDaTapeLibraryScsiTarget indicates the SCSI ID of the tape library.
User Action: If the tape library is failed, check the tape library front panel.
Supporting SNMP Trap Data:
•
sysName
•
cpqHoTrapFlags
•
cpqDaCntlrHwLocation
•
cpqDaTapeLibraryCntlrIndex
•
cpqDaTapeLibraryScsiBus
•
cpqDaTapeLibraryScsiTarget
Microsoft Windows Event ID and SNMP traps 321