HP ProLiant Gen9 Troubleshooting Manual page 136

•
"ERASING"
•
"UNKNOWN"
Message Id: 24711
Severity: Warning
Log message:
The external Smart Array controller located in the MSA chassis labeled as <chassis label> has reported that
logical drive <logical drive number> has encountered a status change from:
Status: <current status>
to
Status: <previous status>
The external Smart Array controller is attached to the host side Smart Array
controller <controller name / slot information>.
<previous status> and <current status> values:
•
"OK"
•
"FAILED"
•
"NOT CONFIGURED"
•
"INTERIM RECOVERY MODE"
•
"READY FOR RECOVERY"
•
"RECOVERING"
•
"WRONG PHYSICAL DRIVE REPLACED"
•
"PHYSICAL DRIVE NOT PROPERLY CONNECTED"
•
"HARDWARE IS OVERHEATING"
•
"HARDWARE HAS OVERHEATED"
•
"EXPANDING"
•
"NOT YET AVAILABLE"
•
"QUEUED FOR EXPANSION"
•
"DISABLED DUE TO SCSI ID CONFLICT"
•
"EJECTED"
•
"ERASING"
•
"UNKNOWN"
Message Id: 24712
Severity: Error
Log message:
The external Smart Array controller located in the MSA chassis labeled as <chassis
label> has reported that logical drive <logical drive number> has encountered
a status change from:
Status: <current status>
HP Smart Array errors 136