HP ProLiant Gen9 Troubleshooting Manual page 239

Status number Error message
Cannot modify user. The login/ user name already exists.
0x0008
Cannot delete user information for currently logged user.
0x0009
User login name was not found.
0x000A
User information is open for read-only access. Write access is
0x000B
required for this operation.
Server information is open for read-only access. Write access is
0x000C
required for this operation.
iLO information is open for read-only access. Write access is
0x000D
required for this operation.
Rack information is open for read-only access. Write access is
0x000E
required for this operation.
Directory information is open for read-only access. Write access is
0x000F
required for this operation.
Internal error.
0x0010
Internal error.
0x0011
Virtual Power Button feature is not supported or not enabled on this
0x0012
server.
Virtual Power Button cable is attached.
0x0013
Virtual Power Button cable is either not attached or not supported.
0x0014
The IP address specified is not valid.
0x0015
The firmware image file is not valid.
0x0016
A valid firmware image has not been loaded.
0x0017
The flash process could not be started.
0x0018
The Remote Insight Board Firmware is being updated. The board will
0x0019
be reset after the operation.
The Remote Insight Board is being reset.
0x001A
The server is being reset.
0x001B
The Integrated Lights-Out Event Log is being cleared.
0x001C
No image present in the Virtual Floppy drive.
0x001D
An invalid virtual floppy option has been given.
0x001E
Failed to allocate virtual floppy image space.
0x001F
The Virtual Floppy image is invalid.
0x0020
The key parameter specified is not valid.
0x0021
The SESSION TIMEOUT value specified is greater the maximum value
0x0022
allowed, 120.
User does NOT have correct privilege for action. ADMIN_PRIV required.
0x0023
User does NOT have correct privilege for action. RESET_SERVER_PRIV
0x0024
required.
User does NOT have correct privilege for action. UPDATE_ILO_PRIV
0x0025
required.
User does NOT have correct privilege for action. CONFIG_ILO_PRIV
0x0026
required.
User does NOT have correct privilege for action. CLEAR_LOGS_PRIV
0x0027
required.
User does NOT have correct privilege for action. CONFIG_RACK_PRIV
0x0028
required.
User does NOT have correct privilege for action. VIRTUAL_MEDIA_PRIV
0x0029
required.
Server is NOT a rack server; Rack commands do not apply.
0x002A
Minimum password length value exceeded.
0x002B
Unknown RIB action.
Unknown SERVER action.
HP iLO errors 239