HP ProLiant Gen9 Troubleshooting Manual page 348

Log Severity: Warning (2)
Log Message: The Thermal Temperature Condition has been set to degraded. The system may be shut down
due to this thermal condition depending on the state of the thermal degraded action value '%4'.
SNMP Trap: cpqHe3ThermalTempDegraded - 6018 in CPQHLTH.MIB
Symptom: The temperature status has been set to degraded. The server's temperature is outside of the normal
operating range. The server is shut down if the cpqHeThermalDegradedAction variable is set to shutdown
(3).
Supporting SNMP Trap Data:
•
sysName
•
cpqHoTrapFlags
•
cpqHeThermalDegradedAction
Supporting SNMP Trap Description: "Temperature out of range. Shutdown may occur."
NT Event ID: 1084 (Hex)0x4435043c (cpqsvmsg.dll)
Log Severity: Information (1)
Log Message: The Thermal Temperature Condition has been set to OK. The server's temperature has returned
to its normal operating range.
SNMP Trap: cpqHe3ThermalTempOk - 6019 in CPQHLTH.MIB
Symptom: The temperature status has been set to OK. The server's temperature has returned to the normal
operating range.
Supporting SNMP Trap Data:
•
sysName
•
cpqHoTrapFlags
Supporting SNMP Trap Description: "Temperature has returned to normal range."
NT Event ID: 1085 (Hex)0xc435043d (cpqsvmsg.dll)
Log Severity: Error (3)
Log Message: A System Fan Condition has been set to failed. The system may be shut down due to this
thermal condition.
SNMP Trap: cpqHe3ThermalSystemFanFailed - 6020 in CPQHLTH.MIB
Symptom: The system fan status has been set to failed. A required system fan is not operating normally. The
system is shut down if the cpqHeThermalDegradedAction variable is set to shutdown (3).
Supporting SNMP Trap Data:
•
sysName
•
cpqHoTrapFlags
•
cpqHeThermalDegradedAction
Supporting SNMP Trap Description: "Required fan not operating normally. Shutdown may occur."
NT Event ID: 1086 (Hex)0x8435043e (cpqsvmsg.dll)
Log Severity: Warning (2)
Microsoft Windows Event ID and SNMP traps 348