1100 Series - HP ProLiant Gen9 Troubleshooting Manual

605-Diskette Drive Type Error.
Possible Cause: Mismatch in drive type occurred.
Action: Run the server setup utility to set the diskette drive type correctly.
611-Primary Floppy Port Address Assignment Conflict
Possible Cause: A hardware conflict in the system is preventing the diskette drive from operating properly.
Action:
Run the server setup utility to configure the diskette drive port address and manually resolve the conflict.
1.
Run Insight Diagnostics and replace failed components as indicated.
2.
612-Secondary Floppy Port Address Assignment Conflict
Possible Cause: A hardware conflict in the system is preventing the diskette drive from operating properly.
Action:
Run the server setup utility to configure the diskette drive port address and manually resolve the conflict.
1.
Run Insight Diagnostics and replace failed components as indicated.
2.

1100 Series

1151-Com Port X Address Assignment Conflict
Possible Cause: Both external and internal serial ports are assigned to COM X.
Action: Run the server setup utility and correct the configuration.
1500 Series
1500: iLO 4 configuration is temporarily unavailable.
Possible cause: iLO is busy or unresponsive to the software that is running on the system.
Action: If the problem persists, perform the following:
Reboot the iLO processor.
1.
Update the iLO firmware.
2.
Reset the iLO NVRAM.
3.
1501: iLO 4 Security Override Switch is set. iLO 4 security is DISABLED!
Possible cause: The iLO option ROM has detected the iLO security override switch is set to ON.
Action: Restore the security override switch setting to the normal position.
1502: iLO 4 is disabled. Use the Security Override Switch and iLO 4 F8 ROM-Based
Setup Utility to enable iLO functionality.
Possible cause: The iLO functionality has been disabled.
HP ProLiant server errors 66