Message Identifiers 24800-24808 - HP ProLiant Gen9 Troubleshooting Manual

Log message: The external Smart Array controller located in the MSA chassis labeled
as <chassis label> is reporting that the <drive type> physical drive located in
bay <bay number> has passed a pre-defined usage threshold.
It currently has <days or percent> <days of / percentage> usage remaining.
Indicates that the drive is approaching the maximum usage limit for writes (wear
out).
The external Smart Array controller is attached to the host side Smart Array
controller <controller name / slot information>.
Message Id: 24799
Severity: Warning
Log message: The <drive type> physical drive located in bay <bay number> could not
be authenticated as a genuine HP hard drive. This drive's status LEDs will not
be controlled. This drive can be found in box <box number> which is connected
to port <port number> of the array controller <controller name / slot
information>.

Message identifiers 24800-24808

Message Id: 24800
Severity: Warning
Log message: The external Smart Array controller located in the MSA chassis labeled
as <chassis label> is reporting that the%3physical drive located in bay <bay
number> could nobe authenticated as a genuine HP hard drive. This drive's status
LEDs will not be controlled.
The external Smart Array controller is attached to the host side Smart Array
controller <controller name / slot information>.
Message Id 24801
Severity: Informational
Log message: Array controller <controller name / slot information> has reported that
its cache is missing. This is an unsupported configuration.
Message Id 24802
Severity: Informational
Log message: The external Smart Array controller located in the MSA chassis labeled
as <chassis label> is reporting that its cache is missing. This is an unsupported
configuration.
The external Smart Array controller is attached to the host side Smart Array
controller <controller name / slot information>.
Message Id 24803
Severity: Warning
Log message: Array controller <controller name / slot information> has reported that
it previously locked up with code <lockup code>.
Message Id 24804
Severity: Warning
HP Smart Array errors 156