HP ProLiant Gen9 Troubleshooting Manual page 191

OA: Remote system log address set to [value:Address]
OA: Remote system log port set to [value:port]
OA: Remote system logging enabled to server [value:Address], port [value:port]
OA: Remote system logging was disabled.
OA: Saving VLAN IPCONFIG changes
OA: Secondary NTP server was set to [value:ntp] by user [value:username].
OA: Secure Shell authorized key file added by [value]
OA: Secure Shell authorized key file cleared by [value]
OA: SNMP Contact set to [value] by user [value:username].
OA: SNMP Location set to [value] by user [value:username].
OA: SNMP ReadOnly community string set to [value] by user [value:username].
OA: SNMP ReadWrite community string set to [value] by user [value:username].
OA: Static TCP/IP settings was modified by user [value:username].
OA: TCP/IP settings was set to DHCP - DynamicDNS by user [value:username].
OA: TCP/IP settings was set to DHCP by user [value:username].
OA: Tcp timeout set to [value:number] minutes.
OA: Trap Receiver [value:address] was added by user [value:username].
OA: Trap Receiver [value:address] was also added as alternative for IPv6 host.
OA: Trap Receiver [value:address] was deleted by user [value:username].
OA: Trusted Host [value:address] was added by user [value:username].
OA: Trusted Host [value:address] was deleted by user [value:username].
OA: Undoing VLAN IPCONFIG changes. IP mode is set to DHCP for OA #[value:number]
OA: Undoing VLAN IPCONFIG changes. IP mode is set to STATIC for OA #[value:number]
OA: USB enable changed to [value]. Rebooting...
OA: User [value:username] privilege level was changed from
[value:Administrator/Operator/User/Anonymous] to
[value:Administrator/Operator/User/Anonymous] by user [value:username]. All web
and CLI sessions (if any) were ended.
OA: User [value:username] was added by user [value:username].
OA: User [value:username] was assigned to group [value:groupname].
OA: User [value:username] was deleted by user [value:username].
OA: User [value:username] was disabled by user [value:username]. All web and CLI
sessions (if any) were ended.
OA: User [value:username] was enabled by user [value:username].
OA: User [value:username] was removed from group [value:groupname].
OA: User [value:username]'s contact was set removed by user [value:username].
OA: User [value:username]'s contact was set to [value] by user [value:username].
OA: User [value:username]'s full name was removed by user [value:username].
OA: User [value:username]'s full name was set to [value:fullname] by user
[value:username].
HP Onboard Administrator errors 191