HP ProLiant Gen9 Troubleshooting Manual page 114

Log message: The <drive type> physical hard drive located in bay <bay number> is
not supported <not supported reason>. This drive can be found in box <box number>
which is connected to port <port number> of the array controller <controller name
/ slot information>.
<not supported reason> values:
•
"because it is a singled ported drive"
•
"because it is a SATA drive"
•
"because it is smaller than the drive it is replacing"
•
"because it is of an unrecognized type"
•
"because it contains an unsupported RIS configuration"
Message Id: 24598
Severity: Informational
Log message: Logical drive <logical drive number> of array controller <controller
name / slot information> has encountered a status change from:
Status: <previous status>
to
Status: <current status>
<previous status> and <current status> values:
•
"OK"
•
"FAILED"
•
"NOT CONFIGURED"
•
"INTERIM RECOVERY MODE"
•
"READY FOR RECOVERY"
•
"RECOVERING"
•
"WRONG PHYSICAL DRIVE REPLACED"
•
"PHYSICAL DRIVE NOT PROPERLY CONNECTED"
•
"HARDWARE IS OVERHEATING"
•
"HARDWARE HAS OVERHEATED"
•
"EXPANDING"
•
"NOT YET AVAILABLE"
•
"QUEUED FOR EXPANSION"
•
"DISABLED DUE TO SCSI ID CONFLICT"
•
"EJECTED"
•
"ERASING"
•
"UNKNOWN"
Message Id: 24599
Severity: Warning
HP Smart Array errors 114