Post Error Messages And Beep Codes; Introduction To Post Error Messages; Non-Numeric Messages Or Beeps Only - HP ProLiant Gen9 Troubleshooting Manual

POST error messages and beep codes

Introduction to POST error messages

The error messages and codes in this section include all messages generated by ProLiant servers. Some
messages are informational only and do not indicate any error. A server generates only the codes that are
applicable to its configuration and options.
IMPORTANT:
apply to the server you are troubleshooting. Refer to the server documentation for information on
procedures, hardware options, software tools, and operating systems supported by the server.
WARNING:
information in the server documentation before removing, replacing, reseating, or modifying
system components.

Non-numeric messages or beeps only

Advanced Memory Protection mode: Advanced ECC
Audible Beeps: None
Possible Cause: Advanced ECC support is enabled.
Action: None.
Advanced Memory Protection mode: Online spare with Advanced ECC
...Xxxx MB System memory and xxxx MB memory reserved for Online Spare.
Audible Beeps: None
Possible Cause: This message indicates Online Spare Memory is enabled and indicates the amount of
memory reserved for this feature.
Action: None.
Advanced Memory Protection mode: Multi-board mirrored memory with Advanced
ECC
...Xxxx MB System memory and xxxx MB memory reserved for Mirroring.
Audible Beeps: None
Possible Cause: This message indicates Mirrored Memory is enabled and indicates the amount of memory
reserved for this feature.
Action: None.
Advanced Memory Protection mode: RAID memory with Advanced ECC
...Xxxx MB System memory and xxxx MB memory reserved for RAID.
This guide provides information for multiple servers. Some information may not
To avoid potential problems, ALWAYS read the warnings and cautionary
HP ProLiant server errors 39