Hp Smart Array Errors; Controller Runtime Leds; P440Ar Controller Leds - HP ProLiant Gen9 Troubleshooting Manual

HP Smart Array errors

Controller runtime LEDs

To determine the controller status, see the appropriate controller-specific section.

P440ar controller LEDs

Immediately after you power up the server, the controller runtime LEDs illuminate briefly in a predetermined
pattern as part of the POST sequence. At all other times during server operation, the illumination pattern of
the runtime LEDs indicates the status of the controller.
Item Color
Green
1
Amber
2
Green
3
Amber
4
Name Interpretation
Heartbeat When the controller is in good health, this LED flashes at 1 Hz.
During power up, this LED is solid for up to 2 seconds.
Fault When an error occurs, this LED is on. During power up, this LED
is solid for up to 2 seconds.
Crypto On = All attached volumes are encrypted.
Off = All attached volumes are plaintext.
Flashing = Both encrypted and plaintext volumes are present.
Debug On = Controller is in reset state.
Off = Controller is in an idle or runtime state.
Flashing 5 Hz = Controller and cache are performing a backup.
HP Smart Array errors 101