Enclosure Event Notifications; Command Line Event Notifications - HP ProLiant Gen9 Troubleshooting Manual

Trap ID
22028
22029
22037
22038
22039
22040
22041
22042
22044
22045
22046
22047
22048
22049
22050
22051

Enclosure event notifications

Enclosure events produce screen messages with the show events option enabled. If you are directly
affected by an event, a message is produced whether the show events option is enabled or disabled.
Event messages include the device affected, the device name, and the date and time of the event. Some
examples of event messages are:
•
The enclosure is in a degraded state.
•
Blade X has experienced a failure.
•
The temperature on Blade X has exceeded the failed threshold.
•
Fan X has experienced a failure.
•
The power supplies are no longer redundant.
•
Power supply X is in a degraded state.
•
The enclosure temperature has exceeded the degraded threshold.

Command line event notifications

When the SET DISPLAY EVENTS option is turned on, the terminal interface displays error, warning, and status
messages, depending on the behavior of the enclosure and components.
The syntax for these messages are:
•
<error>—Description of error
•
<warning>—Description of warning
•
<status>—Description of status
Trap name
cpqRackServerBladeRemoved
cpqRackServerBladeInserted
cpqRackEnclosureManagerDegraded
cpqRackEnclosureManagerOk
cpqRackEnclosureManagerRemoved
cpqRackEnclosureManagerInserted
cpqRackManagerPrimaryRole
cpqRackServerBladeEKeyingFailed
cpqRackNetConnectorRemoved
cpqRackNetConnectorInserted
cpqRackNetConnectorFailed
cpqRackNetConnectorDegraded
cpqRackNetConnectorOk
cpqRackServerBladeToLowPower
cpqRackServerBladeRemoved2
cpqRackServerBladeInserted2
Description
Blade removed (replaced by 22050 in OA
v1.30)
Blade inserted (replaced by 22051 in OA
v1.30)
Onboard Administrator degraded
Onboard Administrator OK
Onboard Administrator removed
Onboard Administrator inserted
Onboard Administrator is Active
Blade eKeying config failed
Interconnect removed
Interconnect inserted
Interconnect failed
Interconnect degraded
Interconnect OK
Blade requested too low power
Blade removed2
Blade inserted2
HP Onboard Administrator errors 205