Command Syntax - D-Link xStack DGS-3426 Cli Manual

The following symbols are used to describe how command entries are made and values and arguments are specified in this
manual. The online help contained in the CLI and available through the console interface uses the same syntax.
<angle brackets>
Purpose
Syntax
Description
Example
Command
[square brackets]
Purpose
Syntax
Description
Example
Command
| vertical bar
Purpose
Syntax
Description
Example
Command
xStack DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
Note: All commands are case-sensitive. Be sure to disable Caps Lock or
any other unwanted function that changes text case.
Encloses a variable or value that must be specified.
create account [admin | user] <username 15>
In the above syntax example, you must supply a username in the
<username> space. Do not type the angle brackets.
create account admin newadmin1
Encloses a required value or set of required arguments. One value
or argument can be specified.
create account [admin | user] <username 15>
In the above syntax example, you must specify either an admin or a
user level account to be created. Do not type the square brackets.
create account user newuser1
Separates two or more mutually exclusive items in a list, one of
which must be entered.
create account [admin | user] <username 15>
In the above syntax example, you must specify either admin, or
user. Do not type the backslash.
show snmp community
8
C S
OMMAND
3
YNTAX