Ip Igmp Snooping Vlan Mcrtrexpiretime; Ip Igmp Snooping Report-Suppression - Dell Networking 2024 Reference Manual

console(config)#ip igmp snooping vlan 2 last-member-query-interval 7

ip igmp snooping vlan mcrtrexpiretime

This command sets the Multicast Router Present Expiration time. The time
is set on a particular VLAN. This is the amount of time in seconds that a
switch waits for a query to be received on an interface before the interface is
removed from the list of interfaces with multicast routers attached. The range
is 1–2147483647 seconds. A value of 0 indicates an infinite time-out (no
expiration). The no form of this command sets the Multicast Router Present
Expiration time to 0. The time is set for a particular VLAN.
Syntax
ip igmp snooping vlan
no igmp snooping vlan
vlan id — Number assigned to the VLAN
•
time — Multicast router present expiration time. (Range: 1–3600)
•
Default Configuration
The default multicast router present expiration time is 300 seconds.
Command Mode
Global Configuration mode
User Guidelines
The mcrexpiretime should be less than the group membership interval.
Example
The following example sets the multicast router present expiration time on
VLAN 2 to 60 seconds.
console(config)#ip igmp snooping vlan 2 mcrtexpiretime 1500

ip igmp snooping report-suppression

This command enables IBMP report suppression on a specific VLAN. The no
form of this command disables report suppression.
462
IGMP Snooping Commands
vlan-id
mcrtexpiretime
vlan-id
mcrtexpiretime
time
time