Ip Igmp Snooping Vlan Mrouter - Dell Networking 2024 Reference Manual

Command Mode
Global Configuration mode.
User Guidelines
There is no equivalent MLD command since this setting applies to both
protocols.
Example
console(config)#ip igmp snooping unregistered floodall

ip igmp snooping vlan mrouter

This command statically configures a port as connected to a multicast router
for a specified VLAN. Use the no form of this command to remove the static
binding.
Syntax
ip igmp snooping vlan
no ip igmp snooping vlan mrouter
vlan id — The number assigned to the VLAN.
•
• interface-id—The next-hop interface to the multicast router.
Default Configuration
There are no multicast router ports configured by default.
Command Mode
Global Configuration mode.
User Guidelines
It is preferable to configure mrouter ports for IGMP snooping as opposed to
configuring a static MAC address entry for the router. A static MAC address
entry is tied to a specific port whereas an mrouter configuration will
dynamically learn the MAC address of the router. Multiple mrouter ports may
be configured for a VLAN.
464
IGMP Snooping Commands
vlan-id
mrouter interface
interface-id