Logging Email - Dell Networking 2024 Reference Manual

Commands in this Chapter
This chapter explains the following commands:

logging email

logging email urgent
logging traps
logging email message-type to-addr
logging email from-addr
logging email message-type subject
logging email logtime
logging email test message-type
logging email
Use the logging email command in Global Configuration mode to enable e-
mail alerting and set the lowest severity level for which log messages are e-
mailed. Use the no form of the command to disable e-mail alerting.
Syntax
logging email [
no logging email
severity —If you specify a severity level, log messages at or above the
•
severity level are e-mailed. The severity level may either be specified by
keyword or as an integer from 0 to 7. The accepted keywords, and the
numeric severity level each represents, are as follows.
– emergency (0)
– alert (1)
– critical (2)
– error (3)
– warning (4)
358
E-mail Alerting Commands
severity
]
show logging email statistics
clear logging email statistics
security
mail-server ip-address | hostname
port (Mail Server Configuration Mode)
username (Mail Server Configuration
Mode)
password (Mail Server Configuration
Mode)
show mail-server