Dell Networking 2024 Reference Manual page 383

Default Configuration
Capture is not enabled by default.
By default, both transmitted and received packets are captured.
Command Modes
Privileged EXEC mode
User Guidelines
In general, starting packet capture erases the previous capture buffer
contents.
Example
console# monitor capture start all
rate-limit cpu
Use the rate-limit cpu command to reduce the amount of unknown
unicast/multicast packets forwarded to the CPU. Use the no form of the
command to set the rate limit to the default value.
Syntax
rate-limit cpu direction input pps
no rate-limit cpu direction input pps
pps_value —The packets per second. The range is 100-1024 packets per
•
second (100-3000 packets per second for N4000 series switches).
Default Configuration
The default ingress rate limit is 1024 packets per second (3000 for N4000
series switches).
Command Modes
Global Configuration mode
pps_value
Ethernet Configuration Commands
383