Show Gvrp Configuration; Gvrp Vlan-Creation-Forbid - Dell Networking 2024 Reference Manual

Example
The following example shows how default dynamic registering and
deregistering is forbidden for each VLAN on port 1/0/8.
console(config)#interface gigabitethernet 1/0/8
console(config-if-Gi1/0/8)#gvrp registration-forbid

gvrp vlan-creation-forbid

Use the gvrp vlan-creation-forbid command in Interface Configuration mode
to disable dynamic VLAN creation. To enable dynamic VLAN creation, use
the no form of this command.
Syntax
gvrp vlan-creation-forbid
no gvrp vlan-creation-forbid
Default Configuration
By default, dynamic VLAN creation is enabled.
Command Mode
Interface Configuration (gigabitethernet, port-channel, tengigabitethernet,
fortygigabitethernet) mode
User Guidelines
This command has no user guidelines.
Example
The following example disables dynamic VLAN creation on port 1/0/8.
console(config)#interface gigabitethernet 1/0/8
console(config-if-Gi1/0/8)#gvrp vlan-creation-forbid

show gvrp configuration

Use the show gvrp configuration command in Privileged EXEC mode to
display GVRP configuration information. Timer values are displayed. Other
data shows whether GVRP is enabled and which ports are running GVRP.
448
GVRP Commands