INSTALLING PICTURETEL LIVE50 HARDWARE
Connecting the
Cameras
Connecting the Live50 Desktop Camera
2-10
This section tells you how to connect and mount both the Live50
desktop camera and the FlipCam camera.
Do not connect or disconnect Live50 components when
your PC is on. Doing so may damage the Live50 hardware.
Camera connections are located in the rear of the unit. To connect the
camera:
1. Plug one end of the video cable into the socket labeled
the camera.
2. Plug the other end of the video cable into the socket labeled
the Live50 board.
3. Plug the AC power adapter cable into the socket labeled
the camera.
Caution
VIDEO
on
on
on
6V