Table of Contents
Advertisement
INSTALLING PICTURETEL LIVE100 HARDWARE
Connecting the
Speakerphone
Unit
3-12
You have two options for mounting the camera:
You can mount the camera on a standard camera tripod.
!
The camera base has a standard-size threaded hole for tripod
mounting. You attach it to the tripod as you would any other
camera.
You can set the camera on any flat, secure surface.
!
If you're using this camera as your main camera, place it on top
of your video monitor. For other uses, you can place it on a
secure shelf or tabletop.
The camera base has a rubber surface to keep it from slipping.
In addition, PictureTel offers an optional document stand that
allows the FlipCam to switch to a downward focus to view
documents on a flat desktop. Refer to Appendix I for ordering this
optional camera stand.
To connect the speakerphone unit:
1. Be sure your PC is turned off.
Do not connect or disconnect Live100 components when
your PC is on. Doing so may damage the Live100 hardware.
2. Locate the 7-pin speakerphone unit cable, with plugs labeled
Caution
.
7
Advertisement
Table of Contents
