(connector labeled VGA)
Closing Your PC
Reconnecting
Cables
4. Peel off the label that includes the "ISDN" marking.
5. Attach this label to your PC chassis to the left of the Audio
Communications board, with the triangle at the top and pointing
toward the board.
To the monitor
Main FlipCam
After you install the Live100 boards and attach the labels, replace
the chassis cover on your PC. Refer to your PC documentation for
instructions.
Reconnect the cables you disconnected earlier from your PC:
1. Connect your monitor cable to the 15-pin connector labeled VGA
on the VGA Video board.
2. Reconnect any other PC cables you disconnected earlier.
Audio
VGA Video
Communications
board
board
8A
Second FlipCam
Closing Your PC
ISDN
VCR/Audio
Aux. Speaker
& Mic.
Speakerphone
VCR or other aux. video device
(connects to VCR's video out)
7
3-9