Table of Contents
Advertisement
3
3A
7
The cables for the speakerphone unit and the FlipCam are
similar, but they are not interchangeable. The end plugs on
the FlipCam cable are labeled
Speakerphone cable are labeled
wrong cable, you might damage the Live100 components.
Be careful when you connect or disconnect the cable. When
connecting the cable, be sure the flat side of the plug lines
up with the flat side of the socket, as shown by the socket
label. When disconnecting the cable, be sure to release the
collar lock by pulling on the plug's collar, not on the cable.
3. Plug one end of the speakerphone cable into the socket labeled
on the speakerphone unit, aligning the plug carefully.
7
The drawing below shows the location of the socket.
4. Plug the other end of the speakerphone cable into the socket
labeled
on the Audio Communications board, aligning it
7
carefully.
Connecting the Speakerphone Unit
Caution
, and the plugs on the
8A
. If you connect the
7
Audio
Communications
board
3-13
Advertisement
Table of Contents
