Table of Contents
Advertisement
INSTALLING PICTURETEL LIVE100 HARDWARE
Connecting the
FlipCam Camera
Connecting the FlipCam to the PC
3-10
This section tells you how to:
Connect the FlipCam camera to your PC
!
Mount and position the camera
!
Do not connect or disconnect Live100 components when
your PC is on. Doing so may damage the Live100 hardware.
To connect the FlipCam to the VGA Video board in your PC, follow
these steps:
1. Tilt the camera body up and away from its circular base, as shown
below.
8A socket
2. Locate the 8-pin FlipCam cable, with plugs labeled
The cable has a ferrite bead near one end.
Caution
Ferrite Bead
VGA Video board
Cable guide
8A
.
Advertisement
Table of Contents
