Connecting The Live50 Board To The Vga Board - PictureTel LIVE50 Installation Manual

Connecting the Live50 Board to the VGA Board

VESA Advanced Feature Connector
To connect the Live50 board to the VGA board:
1. Connect one end of the VAFC cable to the VESA Advanced Feature
Connector on the top of the Live50 board.
2. Connect the other end of the VAFC cable to the VESA Advanced
Feature Connector on the VGA board.
The VESA Advanced Feature Connector on your VGA board
might be different from the connector shown in the following
illustration. With some VGA boards, you might have to twist the
VAFC cable to connect it.
VGA board
Live50 board
Installing the Live50 Board
VAFC cable
Tab
2-7