Table of Contents
Advertisement
Installing the
PictureTel Live
Application
To install the PictureTel Live application from the Setup Wizard,
perform the following steps:
1. Insert DISK 1: SETUP of the Live50 or Live 100 Installation disks in
drive a: or b: and enter a:\setup or b:\setup in the Run dialog box
to run the Setup Wizard.
2. Select (double-click) PictureTel Live (double-click) from the
wizard's display box.
3. Fill in your name, your company, and the serial number of your
PictureTel Live unit and press enter.
You can find the serial number on the product registration card,
which is shipped with the PictureTel Live documentation.
The setup program displays a confirmation window.
4. If the information is correct, press enter (or click the Yes button). If
the information is incorrect, click the No button and make the
corrections.
Setup displays the Installation Path window.
The default drive and directory are C:\PICTEL\PCS. You can
accept the default or change this information by typing a
different name.
Installing the PictureTel Live Application
4-13
Advertisement
Table of Contents
